MDR-X V3 | Rifle | AEG (automatic electric gun) | Black | Silverback

Key features

The receiver, outer barrel, and muzzle brake are manufactured from 6000-series aluminium. The stock, grip, and handguard are made from PA6 nylon with fibreglass reinforcement. The bullpup construction contributes to the compact overall length of 70.5 cm. The model features an ambidextrous fire selector, an ambidextrous cocking lever with realistic movement, interchangeable ejection panels, and two steel QD attachment points at the rear of the stock. All engravings are fully applied, including a unique serial number.

Mechanics and operation

The gearbox features a CNC aluminium cylinder with a diameter of 26 mm and a quick-change spring design. The electronic trigger system operates with Hall Effect sensors for motor control, gear cycle detection, and fire mode selection. The T238 MOSFET is integrated. The 18:1 torque-up gear set and neodymium high-torque motor run at 19,000 RPM at 11.1V. The hop-up unit is made from polycarbonate with a TCD rotary ring design, offering 36 click positions for fine adjustment. The inner barrel is a 420 mm brass unit with a bore of 6.05 mm. The firing system includes semi-automatic and fully automatic modes. The replica shoots at 390 FPS with 0.20 g BBs. The battery is housed in the compartment at the top rear of the replica; the connector is Deans (T-Plug) and the system is designed for 11.1V LiPo batteries, with the option to run on 7.4V.

Practical features

The Picatinny top rail provides mounting options for compatible optics. The M-LOK handguard features three slots at the 3, 6, and 9 o'clock positions for mounting compatible accessories. The thread pitch is 14 mm CCW. Included in the box are: a 75-round airsoft magazine (AR10/SR25-type), a 60 Newton spring, a 100 Newton spring, a pin punch, two hex keys (2.5 mm and 5 mm), a high nub for the hop-up unit, and a PCB jumper for switching between 11.1V and 7.4V or disabling the battery protection. Battery and charger are not included.